HiClean Dispenser
This is a high grade product used for both hand wash and hand rub purposes. HiClean Dispensers help to reduce the exchange of germs and bacteria between users that is spread by contact. It is perfect for use in bathrooms, kitchens, factories, offices, schools, hospitals, hotels and restaurants. Refills and cleaning are quick and easy which reduces mess and makes it ideal for use in businesses and in homes. HiClean soap and sanitiser Dispensers have a sufficient refill capacity of 1 liter which leads to low maintenance time. Plus the amount of soap or sanitiser that comes out is controlled (approx. 1 ml), which means the amount of waste is eliminated. Able to save you money on the amount of soap or sanitiser needed, these dispensers are beneficial to the environment because of the reduced waste.
Dispensing System Instructions
Installing the Dispenser
Do not install in locations where dispenser may be exposed to wet environments, such as showers or areas where walls are washed down.)
1. Install Dispenser at least 6 inches above counter top
2. Clean Installation surface and allow surface to dry for 60 seconds
3. Peel paper off of installation tape located on back of dispenser
4. Press Dispenser firmly onto mounting surface and leave for 12 hours for
maximum adhesion
5. Do NOT fill solution in refill bottle after initial installation for at least 12
hours
6. Do NOT remove refill bottle or rotate or open the foam pump at anytime.
Doing so may result in performance issues
Refilling into the Dispenser Bottle
1.Open Dispenser by pushing release on top of dispenser
2. Do NOT remove Refill bottle from dispenser for purpose of refilling.
3. Remove lid of Refill bottle on top and refill whilst bottle is still placed in the dispenser
Cleaning and Maintenance
1.Clean exterior surface of dispenser using warm water and mild soap when required
2. Do NOT use abrasive cleaners. Dry with a soft cloth
